This AeroSight FDM module measures fuel burn per flight phase, trends stabilized-cruise performance for each aircraft, and tracks how often your fuel-saving procedures are actually flown — all from the recorder data you already send. There is nothing extra to install on the aircraft and no second data feed to manage.
It sits beside engine condition monitoring: one upload serving safety, engineering and fuel.
For each aircraft, every stabilized cruise segment is measured against a reference, so a gradual loss of efficiency shows as a trend rather than hiding in the monthly fuel bill. Segments too short to measure are left out and counted, so you can see what the trend is based on.
Most operators already have fuel-saving procedures. The question is how often they are flown. The module measures each initiative across the fleet — where it applied, how often it was used, and the opportunity that remains — and shows the opportunity as an opportunity, not as a promised saving.
Single-engine taxi
Take-off configuration
Take-off thrust and derate
Landing configuration
Level-off in climb and descent
Reverse thrust use
Speedbrake use in descent
For more information on the Fuel Efficiency module, contact our Sales department at sales@aero-sight.com.
See AeroSight In Action